Skip to content
Home/Answers/Getting started
CANADA ROOFS / Getting started

Getting started: Removal, Partial or Full Retrofit

Getting started: Compare annual cost, risk and schedule across the three routes.

Updated 2026-11-21About 3 min
Affiliate disclosure: some outbound links go to commercial partners. We currently pass no tracking parameters, so we earn no commission from them; if that changes, this page will say so.
Quick answer

Getting started: Compare annual cost, risk and schedule across the three routes. start depends on roof/insulation/vent.

Why it matters

Ice dams are not about too much snow; they are roof heat melting snow that refreezes at the eave. That is insulation and ventilation, not snow removal.

Roof.

Step by step

  1. Check attic R-value and bypass heat leaks.
  2. Confirm intake and exhaust ventilation balance.
  3. Inspect eave ice-and-water shield and gutter drainage.
  4. Do emergency ice removal first, then plan the retrofit.

Common mistakes

  • Removing ice without fixing insulation.
  • Chopping ice with an axe.
  • Adding insulation without sealing bypasses.
  • Ignoring gutter outlets.

Checklist

  • Insulation, bypasses, ventilation, membrane, gutters.
  • Licensed insulation contractor.
  • Roofing contractor.
  • Hygrometer.

Who it is for

If you want a shortlist, this page gives a comparison order screened by Roof. and Insulation., not an absolute ranking.

Key facts

  • Roof.
  • Insulation.
  • Vent.
Getting started: five questions at a glance
QuestionShort answer
Getting started: Before You Start ChecklistGetting started: Check insulation, bypasses, ventilation, membrane and gutters. start depends on roof/insulation/vent.
Getting started: What It CostsGetting started: Convert removal, insulation, ventilation and eave work into a total. start depends on roof/insulation/vent.
Getting started: Spending LessGetting started: Save by sealing bypasses, spot insulation and clearing gutters yourself. start depends on roof/insulation/vent.
Getting started: Removal vs RetrofitGetting started: Compare a one-time retrofit against repeated removal. start depends on roof/insulation/vent.

FAQ

Getting started: Removal, Partial or Full Retrofit

Getting started: Compare annual cost, risk and schedule across the three routes. start depends on roof/insulation/vent.

What should I check before buying a Getting started?

start depends on roof/insulation/vent. Key checks: Roof.; Insulation..

Is a Getting started worth it?

Depends on use, budget and upkeep; a Getting started is not automatically better because it costs more.

Source: National Building Code / CMHC

Top picks

ProductBest forPrice
Attic InsulationInsulationMidSee top pick
Air Sealing KitSealingLowSee top pick
Roof VentVentLowSee top pick

Sources